I do have an option for you to consider for a rear view mirror on your boat similar to the CIPA Comp Universal Rearview Boat Mirror part # CM02000 in the CIPA Rearview Boat Mirror part # CM11050. The CIPA Rearview Boat Mirror part # CM11050 is a bit smaller than the mirror you are referring to measuring only 8" in length and 4" wide whereas the CIPA part # CM02000 has dimensions of 13-1/2" in length by 6-1/2" wide.
The CIPA part # CM11050 is our only compatible option that will allow... view full answer...
When using the CIPA Mirror Bracket # CM02310 that is designed for clamping to a boat windshield you will need to pair it with one of the CIPA Mirrors. You can use either the CIPA Comp Universal Rearview Boat Mirror # CM02000 or CIPA Extreme Rearview Boat Mirror # CM02022. We currently do not carry the screw that holds the mirror to the bracket separately. view full answer...
The CIPA Extreme Rearview Boat Mirror - Multi-Face - Windshield Mount - 20" Long x 7" Wide # CM02022 you were looking at does indeed include a mount that allows this mirror to be installed on boat windshield frames measuring 3/8" - 1-1/4" wide.
I included a video review of the # CM02022 for you to take a look at. view full answer...
There is a clamp-on side mirror for boats which may work for your 1993 Sea Ray. The CIPA Wave Rearview Boat Mirror # CM01874 which is the same clamp-on style but attaches above your windshield. Its face is 14" long x 7" wide and will fit round windshield frames that are 3/8" to 1" wide.
I've attached a link to each of our available boat mirrors for you to take a look at. view full answer...
The replacement mirror head part # CM01300 is a part of the CIPA Comp Rearview Boat Mirror # CM01874 which is designed to fit bar thicknesses of between 3/8 inch to 1 inch. view full answer...
The Jif Marine Pontoon Boat Mirror with Mounting Bracket part # JIF72FR is a universal fit mirror. It is designed to simply clamp onto the railing of a pontoon boat trailer. If you have this railing on your trailer then it should work well for you. There is a swivel mechanism at the base of the mount which can be tightened and loosened with an allen key. view full answer...
The CIPA Concept II Rearview Boat Mirror, Item # CM11071, will clamp to square or round frames. It is designed to fit windshield frames but should work with the Bimini top support. It fits frames from 3/8 inches to 1-1/4 inches and can also be permanently mounted. I contacted the manufacturer and mounting vertically will not be an issue other than you may have some limited rotation since the rotation component is designed for a horizontal mounting. This mirror only comes in white. view full answer...
For your 2001 Four Winns Horizon 230 boat with the Taylor Made windshield with the rounded frame, I actually recommend the CIPA Comp II Rearview Boat Mirror # CM11080.
This mirror fits windshield frames that are between 3/8" - 1-1/4" wide, which tends to accommodate the rounded frames a bit better than the # CM11070 which fits narrower 1/2" - 7/8" frames. The mirror face is slightly longer on # CM11080, measuring 11" long x 4" wide.
I've attached a link to our Returns Policy in case... view full answer...
For your 2011 Jeep Grand Cherokee, I recommend trying the K-Source Universal Towing Mirrors part # KS3891-2. Unfortunately, we have not had a chance to test fit any towing mirrors on your Jeep at this time. However, as long as your existing side mirrors are between 4-1/2" to 11-1/2" tall and have an outer lip for the towing mirrors to grab onto, then they will work well for you.
I have attached a review video of these towing mirrors for you as well. view full answer...
CIPA Comp II Rearview Boat Mirror # CM11081 is meant to mount to the windshield frame and not the actual glass or plexiglass. Does your windshield have a frame in the location you want to mount the mirror? If so, and it is 1/2" to 7/8" thick in that location then this mirror will work.
Otherwise what I would do is use a 1/4 inch thick piece of wood or plastic and attach it to the mirror to close the gap some allowing the mirror to clamp on. view full answer...
Yes, you could absolutely attach the mirror # CM11081 to a rowboat. You could attach is to pretty much anything provided it has a 1/2" or 7/8" frame to attach to. It is designed to attach to the top of a windshield, to give you a rear view at around eye height. I am not sure how your boat is set up, but if the frame of the boat is the proper thickness I imagine you could attach the mirror easily. view full answer...
I have the perfect option that will allow you to see down the entire side of your boat trailer. For your 2014 Ford F-150, I recommend using the K-Source Universal Towing Mirror part # KS3891 as this is a confirmed fit for you vehicle. In addition to fitment, these mirrors stick out much farther than the slide on towing mirrors we have for you. This will in turn provide you with a greater field of view for your trailer. The face of the mirrors are also adjustable which will give you an even... view full answer...
Since the CIPA Comp Universal Rearview Boat Mirror # CM02000 is a universal fit I don't see why you would necessarily have any problems mounting it to your Regal 1900. As you can see in our product review video our team mounts it to a truck and it was installed just fine.
As long as it has a solid 3/8" - 1-1/4" wide, rectangular or round windshield frame you are good to go. view full answer...
CIPA Wave Rearview Boat Mirror - Convex - Round Windshield Mount - 17" x 7" - Black Item # CM02874 isn't design to swivel "on the fly" so to speak but you could loosen, make adjustments, and then tighten it back down without much effort.
The square frame would not be an issue as long as it is 3/8 to 1 inch thick. It just won't be an ideal fit. view full answer...
The K-Source Universal Towing Mirror is ideal for smaller boats, campers, and travel trailers. As long as your factory side mirrors are between 4-1/2" to 11-1/2" tall and have an outer lip around the edge of the mirror then they will work well for you. They are our most highly rated and well reviewed universal towing mirrors we carry. I recommend going with these mirrors for that very same reason. You will also need one mirror for each side of the vehicle. view full answer...
Glad to hear that you were pleased with these mirrors!
The CIPA Custom Towing Mirrors # CM11300 will fit a 2007 - 2018 Toyota Tundra or a 2008 - 2018 Toyota Sequoia. view full answer...
To be honest I had to look up the Glastron GX 205 because I didn't know what it was. Now I do and I want one! So now to explain that to the wife . . . .
For the rearview mirror # CM11080 you can clamp it to the top of the windshield and it will stick up above the glass. Assuming you have it clamped securely and the positional arm knob is tight the wind will not blow it off. I have included a link to a video review of this mirror for you. view full answer...
I went out to the warehouse to inspect and measure mirror # CM01875. It is curved on both the X and Y axis meaning it sticks out further at the center than the top, bottom, left, or right. I placed a straight edge across the housing and from the glass to the straight edge it is approximately 1/8 of an inch (a little less) at the center and 3/16 inches (again a little less) at the ends. The housing is maybe 1/8 of an inch up from the glass. view full answer...
A 2006 Jeep Wrangler is a different generation than a 2007 Jeep Wrangler therefore will be a tad bit different. However, the CIPA Deluxe Door Mount Mirror part # 11650 are a universal fit and work with a variety of different makes/models therefore should still work well with your 2006 model year but we have yet to confirm this. view full answer...
Go To Results